Alloy 317L is a low-carbon, high molybdenum austenitic stainless steel with a higher nickel alloy content than 316L. Developed to resist the attack of sulfuric acid compounds, this alloy combines good corrosion resistance with excellent mechanical properties and ease of fabrication.
317LMN Stainless Steel - Penn StainlessAlloy 317LMN is an austenitic, higher-molybdenum bearing stainless steel further alloyed with nitrogen that is particularly effective in enhancing resistance to pitting and crevice corrosion and also has excellent resistance to chemical attack.
Alloy 317LMN (UNS S31726) is an austenitic chromium-nickel-molybdenum stainless steel with corrosion resistance superior to 316L and 317L. It is a higher molybdenum austenitic stainless steel alloyed with nitrogen the higher molybdenum provides the alloy enhanced corrosion resistance, mainly in acidic chloride containing service.
317LMN Stainless SteelAlloy 317LMN (UNS S31726) is an austenitic chromium-nickel-molybdenum stainless steel with corrosion resistance superior to 316L and 317L. The higher molybdenum content, combined with an addition of nitrogen, provides the alloy with its enhanced corrosion resistance, especially in acidic chloride containing service.
317LMN stainless steel plate UNS S31726317LMN stainless steel is a high molybdenum, austenitic stainless steel with a higher nickel content than 317L and the addition of nitrogen. Nitrogen provides additional strength to this grade, and like the regular variations, it can only be cold worked to harden.
Sandmeyer Steel Company has an extensive inventory of 2205 duplex stainless steel plate in thicknesses from 3/16" (4.8mm) through 6" (152.4mm). The yield strength is about twice that of austenitic stainless steels, thus allowing a designer to save weight and making the alloy more cost competitive when compared to 316L or 317L.
Alloy 316/316L Austenitic Stainless Steel Plate Sandmeyer Steel Company stocks the largest single-site stainless steel plate inventory in North America with thicknesses from 3/16" through 6-1/2" in 1/8" increments. Alloy 316/316L stainless steel plate is also available as E-Z Drill for improved machinability. Available thicknesses for Alloy 316/316L:
Overmatching Superalloy Consumable Inco-weld these alloys. The super austenitic stainless steels exhibit higher PREN values (PREN = %Cr + 3.3 (%Mo) + 16 (%N)) than the duplex grades of stainless steel. The super austenitic steels are used in environments where aqueous corrosion by chloride (and other halides) is a concern (e.g. sea water, paper and pulp bleaching, flue gas
AL-6XN® alloy (UNS N08367) is a low carbon, high purity, nitrogen-bearing "super-austenitic" stainless alloy. The AL6XN alloy was designed to be a seawater
Practical Guidelines for the Fabrication of Austenitic 2 History of austenitic stainless steels 5 3 Metallurgy 8 3.1 Types of stainless steels 8 3.1.1 Austenitic stainless steel 8 3.1.2 Ferritic stainless steel 9 3.1.3 Duplex stainless steel 9 3.1.4 Martensitic stainless steel 9 3.1.5 Precipitation hardening stainless steel 10 3.2 Phase Constituents 10 3.3 Detrimental secondary phases 11
SS 317LMN, Type 317LMN, WNR 1.4439, UNS S31726, The properties of 317LMN is similar to other conventional austenitic stainless steels, and can therefore be fabricated in a manner similar to alloys 304 and 306. The alloy is machined using heavy feeds and slow speeds and welded using all common methods.
Speaking of its good mechanical properties, the yield strength of 317L Stainless Steel plates are slightly lower than that of grade 317 and is valued at 262 Mpa. The melting point for the AISI 317L UNS S31700 plate ranges between 2540 2630°F.Alloy 317L Austenitic Stainless Steel Plate - Sandmeyer SteelAlloy 317L (UNS S31703) is a molybdenum-bearing austenitic stainless steel with greatly increased resistance to chemical attack as compared to the conventional chromium-nickel austenitic stainless steels such as Alloy 304.